beemark
VIP-персона
- Регистрация
- 21 Фев 2008
- Сообщения
- 2,500
- Реакции
- 3,748
- Баллы
- 113
Wave Repair 4.9.4
Wave Repair - с помощью данного звукового редактора, Вы сможете восстанавливать файлы WAV, которые были записаны с виниловых пластинок и магнитных лент. В программе есть множество эффектов для наложения га звуковую дорожку, функция шумопадавления и многое другое.
Features:
Restoration Facilities:
- Direct to disk recording
- Manually redraw waveforms at any level of zoom
- Linear and Bezier interpolation
- Spectral replacement
- Fade-in and fade-out
- Removal of unwanted segments
- Waveform smoothing
- Muting
- Various block copying facilities
- Reduction of vinyl hash ("decrackling")
- Broadband noise reduction
- Automatic click detection and repair with realtime preview
- Manual review of detected clicks
- Equalisation with realtime preview
- Filters with realtime preview
- Channel Mixer with realtime preview
CDR Preparation Facilities:
- Normalisation
- Compression and Volume Adjustment with realtime preview
- Automatically find track split points
- Split tracks on CD block boundaries
- Create CDRWin-style cue sheets (supports tracks and indexes)
User Interface:
- Waveform and Spectral display modes
- Zoom to any level on both axes (time and amplitude)
- Unlimited levels of Undo and Redo
- Macro facility
- Batch mode
- User-configurable colours and menu shortcuts
- Interface to the clipboard
General File Handling:
- Supports large WAV files (up to 4GB)
- Works only with 16 bit stereo WAV files (44.1 or 48 kHz)
- Direct to disk recording
- Manually redraw waveforms at any level of zoom
- Linear and Bezier interpolation
- Spectral replacement
- Fade-in and fade-out
- Removal of unwanted segments
- Waveform smoothing
- Muting
- Various block copying facilities
- Reduction of vinyl hash ("decrackling")
- Broadband noise reduction
- Automatic click detection and repair with realtime preview
- Manual review of detected clicks
- Equalisation with realtime preview
- Filters with realtime preview
- Channel Mixer with realtime preview
CDR Preparation Facilities:
- Normalisation
- Compression and Volume Adjustment with realtime preview
- Automatically find track split points
- Split tracks on CD block boundaries
- Create CDRWin-style cue sheets (supports tracks and indexes)
User Interface:
- Waveform and Spectral display modes
- Zoom to any level on both axes (time and amplitude)
- Unlimited levels of Undo and Redo
- Macro facility
- Batch mode
- User-configurable colours and menu shortcuts
- Interface to the clipboard
General File Handling:
- Supports large WAV files (up to 4GB)
- Works only with 16 bit stereo WAV files (44.1 or 48 kHz)
Bug Fixes
In rare cases, setting up a specific combination of macros could result in an access violation. This has been fixed.
Attempting to scroll with the mouse wheel when there is no WAV file loaded would result in an access violation. This has been fixed.
If a macro includes a step that does a playback, then if used in batch mode a divide by zero error would occur, followed by Wave Repair hanging. This has been fixed.
When executing a macro in normal (non-batch) mode, if a step marked as is invalid then the macro was aborted without any feedback to the user. It has been pointed out that the option relates to the individual step, not the macro as a whole. Therefore an error message informing the user that the macro has been aborted is now output in these circumstances.
On initial setup of soundcards, if no soundcard is selected a "list out of bounds" error would occur, and then Wave Repair would need to be closed from the taskbar. This has been fixed.
Interface
Some users reported that the time counter (at the right hand end of the status line) did not update smoothly when dragging the mouse. This only seemed to happen in Windows Vista or Windows XP with SP3. Therefore in release 4.9.3, the method of repainting the screen during mouse dragging was changed to deal with that. Unfortunately as a side effect for some users it caused the display of the selected region to become "jagged" while dragging. Therefore the change to the method of repainting during dragging that was introduced in 4.9.3 has now become a user-selectable option, so that you can choose whether to use the old or new methods. This option is on the Interface tab of the Options dialog.
The buttons for macro execution on the standard toolbar have until now been grouped into a block of 12, with a "shift" button to switch them to the other 12. This was originally done because most monitors at the time were 800 x 600. Now that most monitors are higher resolution, there is no need for this limitation. Therefore when the screen width is 1024 or more, all 24 macro buttons are shown on the standard toolbar. For screen widths less than 1024, the old interface style remains.
A new option has been added to the Interface tab of the Options dialog which highlights the context surrounding the selected region.
Two new options have been added to the Play/Record menu: "Play Selection With Context Before" and "Play Selection With Context After", to play the selected region plus only the starting or ending context.
A new option has been added to the Markers menu to convert detected clicks into markers.
In rare cases, setting up a specific combination of macros could result in an access violation. This has been fixed.
Attempting to scroll with the mouse wheel when there is no WAV file loaded would result in an access violation. This has been fixed.
If a macro includes a step that does a playback, then if used in batch mode a divide by zero error would occur, followed by Wave Repair hanging. This has been fixed.
When executing a macro in normal (non-batch) mode, if a step marked as is invalid then the macro was aborted without any feedback to the user. It has been pointed out that the option relates to the individual step, not the macro as a whole. Therefore an error message informing the user that the macro has been aborted is now output in these circumstances.
On initial setup of soundcards, if no soundcard is selected a "list out of bounds" error would occur, and then Wave Repair would need to be closed from the taskbar. This has been fixed.
Interface
Some users reported that the time counter (at the right hand end of the status line) did not update smoothly when dragging the mouse. This only seemed to happen in Windows Vista or Windows XP with SP3. Therefore in release 4.9.3, the method of repainting the screen during mouse dragging was changed to deal with that. Unfortunately as a side effect for some users it caused the display of the selected region to become "jagged" while dragging. Therefore the change to the method of repainting during dragging that was introduced in 4.9.3 has now become a user-selectable option, so that you can choose whether to use the old or new methods. This option is on the Interface tab of the Options dialog.
The buttons for macro execution on the standard toolbar have until now been grouped into a block of 12, with a "shift" button to switch them to the other 12. This was originally done because most monitors at the time were 800 x 600. Now that most monitors are higher resolution, there is no need for this limitation. Therefore when the screen width is 1024 or more, all 24 macro buttons are shown on the standard toolbar. For screen widths less than 1024, the old interface style remains.
A new option has been added to the Interface tab of the Options dialog which highlights the context surrounding the selected region.
Two new options have been added to the Play/Record menu: "Play Selection With Context Before" and "Play Selection With Context After", to play the selected region plus only the starting or ending context.
A new option has been added to the Markers menu to convert detected clicks into markers.
Год выхода: 2013
ОС:
Язык: Английский
Таблетка: есть (Regged-BLiZZARD)
Размер: 3,2 Mb
